Engineering Calculators / AWG Converter

AWG Converter

Convert between AWG sizes and metric cross-sections in both directions, or look a size up in the reference table below.

Conversion result

Pick a value and press Convert.

AWG reference table

AWG Cross-section (mm²) Ampacity (Cu, 75 °C)
4/0 107.22 230 A
3/0 85.01 200 A
2/0 67.43 175 A
1/0 53.49 150 A
1 42.41 130 A
2 33.62 115 A
3 26.67 100 A
4 21.15 85 A
6 13.3 65 A
8 8.367 50 A
10 5.261 35 A
12 3.309 25 A
14 2.081 20 A
16 1.309 —
18 0.823 —
20 0.5176 —
22 0.3256 —
24 0.2047 —
26 0.129 —
28 0.081 —

Sizes 16 AWG and finer are signal sizes without a NEC building-wire ampacity rating.

How it works

The table lists the geometric cross-sections of standard AWG sizes (ASTM B258): diameter d = 0.005 in × 92(36−n)/39, area A = π/4 × d². The mm² → AWG direction returns the nearest standard size and shows how far your value sits from it. This is a nearest-size match — not the smallest listed size that still meets a required area; the Wire Gauge Calculator uses that different rule internally.

These are solid bare conductor values. Stranded conductors (IEC 60228 classes) and insulation add thickness, so real cable outer dimensions and nominal metric sizes can differ slightly — always confirm against the manufacturer datasheet.

Have a Cable Assembly Project in Mind?

Send us your drawings, component references, or project requirements. We can review the available information and help identify the next steps for quotation.